What Is Alliance Alliance Gator Seal Signature Series Natural Look Water Based Paver Sealer?
\n\n
\nImportant: Alliance Gator Seal Signature Series Natural Look is for unsealed concrete paver surfaces only. It cannot be used as a resealer over an existing sealer coating. Pavers must be clean and largely dry, though Alliance Gator Seal Signature Series Natural Look can be applied on slightly damp surfaces unlike solvent based sealers and free of all stains and efflorescence before application. Wait at least 60 days after new paver installation before sealing. Temperature must be between 60°F and 85°F at time of application.\n
\n\n
Alliance Gator Seal Signature Series Natural Look is a water based fluorochemical sealer that penetrates deep into concrete paver surfaces to protect them from the inside out. It delivers a high gloss wet look finish that enhances the natural color of your pavers with a subtle sheen. The result is a natural look appearance with zero gloss that makes pavers look their best while adding a durable protective layer underneath.
\n\n
Alliance Gator Seal Signature Series Natural Look protects concrete pavers against oil and dirt penetration, de icing salt corrosion, and UV ray damage that fades paver color over time. It also acts as a joint stabilizer, helping to firm up polymeric sand joints and reduce joint erosion between sealing cycles. One coat is all that is needed. When used as a joint sand stabilizer with ASTM C144 sand rather than polymeric sand, coverage is approximately 100 sq ft per gallon. Alliance Gator Seal Signature Series Natural Look is rain safe just 24 hoursutes after application and the sealed surface can be used after 24 hours.
\n\n
Available in 1 gallon and 5 gallon sizes. Coverage is approximately 200 sq ft per gallon as a stand alone sealer, meaning the 5 gallon size covers approximately 1,000 sq ft as a stand alone sealer. suitable for most residential driveways and large patio areas. Two people are recommended for application. Apply with a sprayer in 60 sq ft sections and back roll with a water based foam roller (yellow) to remove excess sealer from the surface.
\n\n
\nNot sure which sealer is right for your pavers? We sell an 8 oz sample bottle of this sealer so you can test the finish and appearance on your specific pavers before committing to a full 1 gallon or 5 gallon order. Order a sample here.\n
\n
Not sure whether Alliance Gator Seal Signature Series Natural Look is the right finish for your pavers, or whether you need Satin Look, Natural Look, or Resealer instead? Call or text us 24/7 at (856) 418-4895 and we will help you choose the right sealer before you order.
\n\n\n
\n
\n\n
1 Gallon
\n
Covers approx. 175 sq ft
\n
\n
\n\n
5 Gallon
\n
Covers approx. 875 sq ft
\n
\n
\n
\n\n\n
\n
Is Alliance Gator Seal Signature Series Natural Look the Right Sealer for Your Pavers?
\n\n
\nUnsealed surfaces only. Not a resealer. Alliance Gator Seal Signature Series Natural Look is formulated for first time sealing of bare unsealed concrete pavers. If your pavers are already sealed, you need Gator Seal Resealer instead. Not sure if your pavers are sealed or unsealed? Call us at (856) 418-4895.\n
\n\n
\n
\nHomeowners who want a clean finished look without heavy gloss Alliance Gator Seal Signature Series Natural Look delivers a high gloss wet look finish that enhances paver color and gives the surface a well-maintained polished appearance without the mirror-like shine of a wet look sealer. It is the finish of choice for homeowners who want the maximum visual impact and the most vibrant, color-enhanced appearance from their paver surface.
\n
\n\n
\n
\nConcrete paver driveways, patios, walkways, and pool surrounds Alliance Gator Seal Signature Series Natural Look is suitable for all standard concrete paver applications including driveways, patios, walkways, steps, and pool surrounds. The sealer protects against the specific challenges each surface faces: oil from vehicles on driveways, de icing salt in colder climates, and UV fading on sun-exposed surfaces.
\n
\n\n
\n
\nPaver surfaces with polymeric sand joints that need stabilizing Alliance Gator Seal Signature Series Natural Look acts as a joint stabilizer in addition to sealing the paver surface. This dual function makes it particularly valuable on paver surfaces where the polymeric sand joints are beginning to show wear or where extra joint stability is wanted between re-sanding cycles.
\n
\n\n
\n
\nCold climate applications where de icing salts are used Alliance Gator Seal Signature Series Natural Look creates a protective barrier inside the paver that resists corrosion from de icing salts. This makes it particularly well suited for driveways and walkways in northern climates where salt and calcium chloride are applied in winter.
\n
\n\n
\n
\nNot for already sealed pavers or natural stone Alliance Gator Seal Signature Series Natural Look is formulated for bare unsealed concrete pavers, natural stone, masonry, and retaining walls. It cannot be used over an existing sealer coating. use Gator Seal Resealer for that application. It is not recommended for natural stone surfaces.
\n
\n\n
\nComparing sealer finishes? Wet Look sits between Natural Look (no sheen) and Wet Look (high gloss). If you want the pavers to look exactly as they do naturally, choose Natural Look. If you want a bold wet appearance, choose Wet Look. Satin is the balanced option most homeowners prefer. Still unsure? Call or text us at (856) 418-4895.\n
\n
\n\n\n
\n
What Does Alliance Alliance Gator Seal Signature Series Natural Look Water Based Paver Sealer Do?
\n\n
\n
\nHigh gloss wet look finish with enhanced color Alliance Gator Seal Signature Series Natural Look delivers a refined high gloss finish that enhances the natural color of concrete pavers with a subtle high gloss wet finish. The finish makes pavers look cleaner and more vibrant without the heavy reflective gloss of a wet look sealer.
\n
\n\n
\n
\nDeep penetrating acrylic formula Alliance Gator Seal Signature Series Natural Look penetrates deep into the concrete paver structure rather than forming a thick film on the surface. This deep penetration ensures the protective properties work from within the paver, creating a more durable and longer lasting seal compared to surface-only coatings.
\n
\n\n
\n
\nProtects against oil, dirt, de icing salt, and UV damage Alliance Gator Seal Signature Series Natural Look creates a barrier inside the paver that resists oil and dirt penetration, de icing salt corrosion, and UV ray damage that causes paver fading and color degradation over time. Sealed pavers are significantly easier to clean and maintain.
\n
\n\n
\n
\nActs as a joint stabilizer In addition to sealing the paver surface, Alliance Gator Seal Signature Series Natural Look penetrates into the polymeric sand joints and helps stabilize them, reducing joint erosion and extending the life of the jointing material between re-sanding cycles.
\n
\n\n
\n
\nRain safe in 24 hoursutes Alliance Gator Seal Signature Series Natural Look is water repellent and rain safe just 24 hoursutes after application. Once rain safe, light rain will not damage the applied sealer. The sealed surface is ready for foot traffic and normal use after 24 hours.
\n
\n\n
\n
\nOne coat application Alliance Gator Seal Signature Series Natural Look requires only one coat. Applying a second coat is not recommended and will not improve results. The spray and back roll application method ensures even coverage and removes excess sealer that could cause uneven appearance or pooling on the surface.
\n
\n
\n\n\n
\n
How to Apply Alliance Alliance Gator Seal Signature Series Natural Look Water Based Paver Sealer
\n
Always refer to the latest Alliance Gator Seal Signature Series Natural Look Technical Data Sheet (TDS) before applying. Two people are recommended for application. Watch the Alliance online application video before starting.
\n\n
\nCritical pre-application requirements: Pavers must be at least 60 days old. Surface must be 100 percent dry. pavers and jointing sand both. Temperature must be between 32°F and 85°F. Paver surface must be cool to the touch. No rain expected within 24 hours of application. Allow 48 hours after polymeric sand installation before sealing. All stains, efflorescence, and existing sealer must be fully removed before Alliance Gator Seal Signature Series Natural Look is applied. Test on a hidden 4 sq ft area first.
\n\n
\n
1
\n
\n
Remove all stains and strip any existing sealer
\n
Remove all oil, grease, and rust stains using the appropriate Gator Clean products. If any unknown coating exists on the paver surface, remove it completely using Gator Sealer Stripper before applying Alliance Gator Seal Signature Series Natural Look. Applying over a contaminated or previously sealed surface will result in poor adhesion and sealer failure.
\n
\n
\n\n
\n
2
\n
\n
Replace contaminated jointing sand
\n
Remove all contaminated jointing material and replace with fresh Gator Polymeric Sand following the standard installation instructions. Allow the new polymeric sand to harden for a minimum of 48 hours at above 60°F with no rain before proceeding to the next step.
\n
\n
\n\n
\n
3
\n
\n
Clean the entire surface with Gator Efflorescence Cleaner
\n
Clean the entire paver surface with Gator Efflorescence Cleaner. This removes any efflorescence trapped in the paver pores and thoroughly cleans the surface to ensure proper sealer adhesion. Wait at least 48 hours at above 60°F with no rain after cleaning so the surface and polymeric sand are completely dry before applying Alliance Gator Seal Signature Series Natural Look.
\n
\n
\n\n
\n
4
\n
\n
Apply Alliance Gator Seal Signature Series Natural Look in 60 sq ft sections
\n
Using a sprayer, apply one coat of Alliance Gator Seal Signature Series Natural Look in sections of approximately 60 sq ft at a time. Do not thin or dilute the product. Apply evenly across each section before moving to the back rolling step. Work in sections to ensure the sealer does not begin to cure before the roller step is completed.
\n
\n
\n\n
\n
5
\n
\n
Back roll immediately with a water based foam roller (yellow)
\n
Immediately after spraying each 60 sq ft section, use a water based foam roller (yellow) to back roll the Alliance Gator Seal Signature Series Natural Look, removing excess sealer left on the surface. This step is critical to achieving an even, consistent finish. This is why two people are recommended. one sprays while the other back rolls. Apply one coat only.
\n
\n
\n\n
\n
6
\n
\n
Allow 24 hoursutes to rain safe, 24 hours to full use
\n
Alliance Gator Seal Signature Series Natural Look is rain safe 24 hoursutes after application. Keep foot traffic and vehicles off the sealed surface for 24 hours after application to allow the sealer to fully cure. Clean all application equipment with water and soap immediately after use.
\n
\n
\n\n
\n
Do not apply Alliance Gator Seal Signature Series Natural Look if any of these conditions exist
\n
Pavers are less than 60 days old
\n
Surface is damp or wet. pavers and sand must be 100 percent dry
\n
Temperature is below 60°F or above 85°F
\n
Rain is forecast within 24 hoursutes of application
\n
48 hours of dry conditions before application have not been confirmed
\n
Existing sealer coating has not been fully stripped
\n
Stains, efflorescence, or contamination remain on the paver surface
\n
\n
\n\n\n
\n
Technical Specifications: Alliance Alliance Gator Seal Signature Series Natural Look Water Based Paver Sealer
\n
\nProduct typeWater based acrylic paver sealer\n
\n
\nFinishHigh gloss wet look\n
\n
\nCompatible surfacesUnsealed concrete pavers, natural stone, masonry, and retaining walls\n
\n
\nCan be used as resealerNo. unsealed surfaces only\n
\n
\nCoverage per gallonApproximately 175 sq ft (varies by porosity and joint size)\n
\n
\nCoverage per 5 gallonApproximately 875 sq ft\n
\n
\nNumber of coatsOne coat only\n
\n
\nApplication methodSprayer and water based foam roller (yellow). 2 people recommended.\n
\n
\nSection size per application pass60 sq ft sections\n
\n
\nRain safe after application24 hoursutes\n
\n
\nFull use after application24 hours\n
\n
\nApplication temperature32°F to 85°F (16°C to 29°C)\n
\n
\nDry conditions required before applyingMinimum 48 hours\n
\n
\nMinimum paver age before sealing60 days after installation\n
\n
\nJoint stabilizerYes\n
\n
\nTool cleanupWater and soap\n
\n
\nDilution requiredNo. apply full strength\n
\n
\nMinimum storage temperatureAbove 32°F (0°C) at all times\n
\n
\nAvailable sizes1 gallon and 5 gallon\n
\n
\nManufacturerAlliance Designer Products Inc.\n
\n
All specifications sourced from the official Alliance Gator Technical Data Sheet (TDS). Always verify the latest TDS at AllianceGator.com before applying. Coverage varies based on paver porosity and joint size. Specifications are subject to change by the manufacturer.
\n\n\n
\n
Manufacturer Technical Data Sheet: Alliance Gator Seal Signature Series Natural Look
\n
Official document published by Alliance Designer Products Inc. Contains full application instructions, surface preparation requirements, and warranty details.
\n
alliancegator.com. Opens in new tab
\n
\n\n\n
\n\n\n
\n
How Much Alliance Gator Seal Signature Series Natural Look Do You Need?
\n
Coverage varies by surface porosity and joint width. The 175 sq ft per gallon rate applies to standard concrete paver surfaces. More porous natural stone and masonry surfaces may absorb more sealer and reduce coverage per gallon.
\n
\n
Coverage per gallon — concrete pavers, stone and masonry
\n
\n
\n\n1 Gallon\n
\n~175 sq ft\n
\n
\n
\n\n5 Gallon\n
\n~875 sq ft\n
\n
\n
\n\n8 oz Sample\n
\n~21 sq ft\n
\n
\n
\n
\n
\n
Size
\n
Coverage
\n
Best For
\n
\n\n
\n
1 Gallon
\n
~175 sq ft
\n
Patios and walkways up to 175 sq ft
\n
\n
\n
5 Gallon
\n
~875 sq ft
\n
Large patios, driveways, and retaining walls
\n
\n
\n
8 oz Sample
\n
~21 sq ft
\n
Test on your specific surface before ordering
\n
\n\n
\n
\n
Coverage varies by surface porosity and joint width. More porous natural stone and masonry will reduce coverage per gallon. Alliance Gator Seal Signature Series Natural Look carries a 10 year limited warranty when applied correctly to eligible surfaces. Not sure how many gallons you need? Call us at (856) 418-4895.
\n
\n\n\n
\n
Why Buy Alliance Gator Seal Signature Series Natural Look from Polymeric Sand Store?
\n
Alliance makes excellent products and we carry them because we believe in them. Here is what you get when you order Alliance Gator Seal Signature Series Natural Look from Polymeric Sand Store.
\n
\n
\nSame day shipping on every order Order Alliance Gator Seal Signature Series Natural Look before 2 PM Eastern time and your order ships today. We ship to the continental United States every day.
\n
\n
\n
\nReal expert advice available 24 hours a day, 7 days a week Call or text (856) 418-4895 any time. Not sure if Alliance Gator Seal Signature Series Natural Look is the right finish for your pavers, or whether you need Satin Look, Natural Look, or Resealer? We will help you make the right choice before you order.
\n
\n
\n
\nFull Alliance product line available We carry the complete Alliance line including all polymeric sands, jointing materials, cleaners, and sealers. Order Alliance Gator Seal Signature Series Natural Look together with Gator Shampoo, Gator Efflorescence Cleaner, and your polymeric sand in one shipment.
\n
\n
\n
\nCoverage calculation support Alliance Gator Seal Signature Series Natural Look coverage varies by paver porosity and joint width. Call us and we will help you calculate how many gallons you need before you order so you are not short on a job.
\n
\n
\n
\n30 day satisfaction guarantee If something is wrong with your order, contact us within 30 days and we will make it right. We accept returns on items that are unopened, unused, and in their original packaging. You can return the product for a full refund, or contact us for a pre-paid return label which will be deducted from your refund.
\n
\n
\n\n\n
\n
Frequently Asked Questions: Alliance Alliance Gator Seal Signature Series Natural Look Water Based Paver Sealer
\n\n
\n
All three are acrylic based paver sealers that provide the same protection against oil, dirt, de icing salt, and UV damage. The difference is finish appearance only. Natural Look leaves pavers looking exactly as they do unsealed. no sheen at all. Alliance Gator Seal Signature Series Natural Look delivers a low gloss high gloss wet finish that enhances color slightly. Wet Look provides a high gloss finish that makes pavers look wet and dramatically deepens the color. Most homeowners choose Wet Look as the balanced option. Call us at (856) 418-4895 and we can help you choose.
\n
\n\n
\n
No. Alliance Gator Seal Signature Series Natural Look is specifically formulated for unsealed surfaces only and cannot be used as a resealer over an existing sealer coating. If your pavers are already sealed, you need Gator Seal Resealer, which is designed to penetrate and reactivate an existing sealer. Applying Alliance Gator Seal Signature Series Natural Look over an existing sealer will result in poor adhesion and sealer failure.
\n
\n\n
\n
Wait at least 60 days after new paver installation before applying Alliance Gator Seal Signature Series Natural Look. New concrete pavers need time to fully cure and off-gas before sealing. Sealing too early can trap moisture inside the paver, cause discoloration, or prevent the sealer from properly bonding to the surface. Always consult the paver manufacturer for their specific recommendation on when to seal.
\n
\n\n
\n
The application process requires spraying the sealer onto the surface in 60 sq ft sections and then immediately back rolling with a water based foam roller (yellow) to remove excess sealer. This must happen quickly before the sealer begins to cure. With one person, it is very difficult to spray and back roll fast enough to avoid uneven application or pooling. With two people. one spraying and one rolling. the process moves efficiently and the finish comes out consistent and even.
\n
\n\n
\n
Coverage is approximately 200 sq ft per gallon as a stand alone sealer, though this varies based on paver porosity and joint width. More porous pavers and wider joints absorb more sealer and reduce coverage. For a 500 sq ft patio, plan for approximately 3 gallons. For a 900 sq ft driveway, the 5 gallon size will typically cover the full area. Call us at (856) 418-4895 and we will help you calculate the right amount before you order.
\n
\n\n
\n
Orders placed before 2 PM Eastern time ship the same day. We keep Alliance Gator Seal Signature Series Natural Look in both the 1 gallon and 5 gallon sizes in stock and ship to homeowners and contractors across the continental United States. For questions about your order, call or text us at (856) 418-4895.
\n
\n
\n\n\n
\n
\n
Questions About Alliance Alliance Gator Seal Signature Series Natural Look Water Based Paver Sealer?
\n
Call or text us 24/7 at (856) 418-4895. Not sure which sealer finish is right for your pavers? We will help you choose between Wet Look, Wet Look, Natural Look, and Resealer before you order. Orders placed before 2 PM Eastern time ship the same day.
Alliance Gator Seal Signature Series Natural Look Water Based Sealer
1 / 2
Alliance Gator Seal Signature Series Natural Look Water Based Sealer
Alliance Designer Products · Sold by Polymeric Sand Store
Gator Seal Signature Series Natural Look Water Based Sealer
High gloss water based sealer for concrete pavers. No color enhancement. Can be applied on damp surfaces. Water based fluorochemical sealer for concrete pavers, natural stone, masonry, and retaining walls. Zero gloss natural look finish. Works down to 32°F. Can be applied on damp surfaces. 10 year limited warranty. Rain safe in 24 hours.
Zero Gloss. Natural Look Finish.Works Down to 32°FConcrete Pavers, Stone and Masonry
200 ft²/galCoverage per gallon
24 hoursRain safe after
1 gal / 5 galAvailable sizes
What Is Alliance Alliance Gator Seal Signature Series Natural Look Water Based Paver Sealer?
Important: Alliance Gator Seal Signature Series Natural Look is for unsealed concrete paver surfaces only. It cannot be used as a resealer over an existing sealer coating. Pavers must be clean and largely dry, though Alliance Gator Seal Signature Series Natural Look can be applied on slightly damp surfaces unlike solvent based sealers and free of all stains and efflorescence before application. Wait at least 60 days after new paver installation before sealing. Temperature must be between 60°F and 85°F at time of application.
Alliance Gator Seal Signature Series Natural Look is a water based fluorochemical sealer that penetrates deep into concrete paver surfaces to protect them from the inside out. It delivers a high gloss wet look finish that enhances the natural color of your pavers with a subtle sheen. The result is a natural look appearance with zero gloss that makes pavers look their best while adding a durable protective layer underneath.
Alliance Gator Seal Signature Series Natural Look protects concrete pavers against oil and dirt penetration, de icing salt corrosion, and UV ray damage that fades paver color over time. It also acts as a joint stabilizer, helping to firm up polymeric sand joints and reduce joint erosion between sealing cycles. One coat is all that is needed. When used as a joint sand stabilizer with ASTM C144 sand rather than polymeric sand, coverage is approximately 100 sq ft per gallon. Alliance Gator Seal Signature Series Natural Look is rain safe just 24 hoursutes after application and the sealed surface can be used after 24 hours.
Available in 1 gallon and 5 gallon sizes. Coverage is approximately 200 sq ft per gallon as a stand alone sealer, meaning the 5 gallon size covers approximately 1,000 sq ft as a stand alone sealer. suitable for most residential driveways and large patio areas. Two people are recommended for application. Apply with a sprayer in 60 sq ft sections and back roll with a water based foam roller (yellow) to remove excess sealer from the surface.
Not sure which sealer is right for your pavers? We sell an 8 oz sample bottle of this sealer so you can test the finish and appearance on your specific pavers before committing to a full 1 gallon or 5 gallon order. Order a sample here.
Not sure whether Alliance Gator Seal Signature Series Natural Look is the right finish for your pavers, or whether you need Satin Look, Natural Look, or Resealer instead? Call or text us 24/7 at (856) 418-4895 and we will help you choose the right sealer before you order.
1 Gallon
Covers approx. 175 sq ft
5 Gallon
Covers approx. 875 sq ft
Is Alliance Gator Seal Signature Series Natural Look the Right Sealer for Your Pavers?
Unsealed surfaces only. Not a resealer. Alliance Gator Seal Signature Series Natural Look is formulated for first time sealing of bare unsealed concrete pavers. If your pavers are already sealed, you need Gator Seal Resealer instead. Not sure if your pavers are sealed or unsealed? Call us at (856) 418-4895.
Homeowners who want a clean finished look without heavy gloss Alliance Gator Seal Signature Series Natural Look delivers a high gloss wet look finish that enhances paver color and gives the surface a well-maintained polished appearance without the mirror-like shine of a wet look sealer. It is the finish of choice for homeowners who want the maximum visual impact and the most vibrant, color-enhanced appearance from their paver surface.
Concrete paver driveways, patios, walkways, and pool surrounds Alliance Gator Seal Signature Series Natural Look is suitable for all standard concrete paver applications including driveways, patios, walkways, steps, and pool surrounds. The sealer protects against the specific challenges each surface faces: oil from vehicles on driveways, de icing salt in colder climates, and UV fading on sun-exposed surfaces.
Paver surfaces with polymeric sand joints that need stabilizing Alliance Gator Seal Signature Series Natural Look acts as a joint stabilizer in addition to sealing the paver surface. This dual function makes it particularly valuable on paver surfaces where the polymeric sand joints are beginning to show wear or where extra joint stability is wanted between re-sanding cycles.
Cold climate applications where de icing salts are used Alliance Gator Seal Signature Series Natural Look creates a protective barrier inside the paver that resists corrosion from de icing salts. This makes it particularly well suited for driveways and walkways in northern climates where salt and calcium chloride are applied in winter.
Not for already sealed pavers or natural stone Alliance Gator Seal Signature Series Natural Look is formulated for bare unsealed concrete pavers, natural stone, masonry, and retaining walls. It cannot be used over an existing sealer coating. use Gator Seal Resealer for that application. It is not recommended for natural stone surfaces.
Comparing sealer finishes? Wet Look sits between Natural Look (no sheen) and Wet Look (high gloss). If you want the pavers to look exactly as they do naturally, choose Natural Look. If you want a bold wet appearance, choose Wet Look. Satin is the balanced option most homeowners prefer. Still unsure? Call or text us at (856) 418-4895.
What Does Alliance Alliance Gator Seal Signature Series Natural Look Water Based Paver Sealer Do?
High gloss wet look finish with enhanced color Alliance Gator Seal Signature Series Natural Look delivers a refined high gloss finish that enhances the natural color of concrete pavers with a subtle high gloss wet finish. The finish makes pavers look cleaner and more vibrant without the heavy reflective gloss of a wet look sealer.
Deep penetrating acrylic formula Alliance Gator Seal Signature Series Natural Look penetrates deep into the concrete paver structure rather than forming a thick film on the surface. This deep penetration ensures the protective properties work from within the paver, creating a more durable and longer lasting seal compared to surface-only coatings.
Protects against oil, dirt, de icing salt, and UV damage Alliance Gator Seal Signature Series Natural Look creates a barrier inside the paver that resists oil and dirt penetration, de icing salt corrosion, and UV ray damage that causes paver fading and color degradation over time. Sealed pavers are significantly easier to clean and maintain.
Acts as a joint stabilizer In addition to sealing the paver surface, Alliance Gator Seal Signature Series Natural Look penetrates into the polymeric sand joints and helps stabilize them, reducing joint erosion and extending the life of the jointing material between re-sanding cycles.
Rain safe in 24 hoursutes Alliance Gator Seal Signature Series Natural Look is water repellent and rain safe just 24 hoursutes after application. Once rain safe, light rain will not damage the applied sealer. The sealed surface is ready for foot traffic and normal use after 24 hours.
One coat application Alliance Gator Seal Signature Series Natural Look requires only one coat. Applying a second coat is not recommended and will not improve results. The spray and back roll application method ensures even coverage and removes excess sealer that could cause uneven appearance or pooling on the surface.
How to Apply Alliance Alliance Gator Seal Signature Series Natural Look Water Based Paver Sealer
Always refer to the latest Alliance Gator Seal Signature Series Natural Look Technical Data Sheet (TDS) before applying. Two people are recommended for application. Watch the Alliance online application video before starting.
Critical pre-application requirements: Pavers must be at least 60 days old. Surface must be 100 percent dry. pavers and jointing sand both. Temperature must be between 32°F and 85°F. Paver surface must be cool to the touch. No rain expected within 24 hours of application. Allow 48 hours after polymeric sand installation before sealing. All stains, efflorescence, and existing sealer must be fully removed before Alliance Gator Seal Signature Series Natural Look is applied. Test on a hidden 4 sq ft area first.
1
Remove all stains and strip any existing sealer
Remove all oil, grease, and rust stains using the appropriate Gator Clean products. If any unknown coating exists on the paver surface, remove it completely using Gator Sealer Stripper before applying Alliance Gator Seal Signature Series Natural Look. Applying over a contaminated or previously sealed surface will result in poor adhesion and sealer failure.
2
Replace contaminated jointing sand
Remove all contaminated jointing material and replace with fresh Gator Polymeric Sand following the standard installation instructions. Allow the new polymeric sand to harden for a minimum of 48 hours at above 60°F with no rain before proceeding to the next step.
3
Clean the entire surface with Gator Efflorescence Cleaner
Clean the entire paver surface with Gator Efflorescence Cleaner. This removes any efflorescence trapped in the paver pores and thoroughly cleans the surface to ensure proper sealer adhesion. Wait at least 48 hours at above 60°F with no rain after cleaning so the surface and polymeric sand are completely dry before applying Alliance Gator Seal Signature Series Natural Look.
4
Apply Alliance Gator Seal Signature Series Natural Look in 60 sq ft sections
Using a sprayer, apply one coat of Alliance Gator Seal Signature Series Natural Look in sections of approximately 60 sq ft at a time. Do not thin or dilute the product. Apply evenly across each section before moving to the back rolling step. Work in sections to ensure the sealer does not begin to cure before the roller step is completed.
5
Back roll immediately with a water based foam roller (yellow)
Immediately after spraying each 60 sq ft section, use a water based foam roller (yellow) to back roll the Alliance Gator Seal Signature Series Natural Look, removing excess sealer left on the surface. This step is critical to achieving an even, consistent finish. This is why two people are recommended. one sprays while the other back rolls. Apply one coat only.
6
Allow 24 hoursutes to rain safe, 24 hours to full use
Alliance Gator Seal Signature Series Natural Look is rain safe 24 hoursutes after application. Keep foot traffic and vehicles off the sealed surface for 24 hours after application to allow the sealer to fully cure. Clean all application equipment with water and soap immediately after use.
Do not apply Alliance Gator Seal Signature Series Natural Look if any of these conditions exist
Pavers are less than 60 days old
Surface is damp or wet. pavers and sand must be 100 percent dry
Temperature is below 60°F or above 85°F
Rain is forecast within 24 hoursutes of application
48 hours of dry conditions before application have not been confirmed
Existing sealer coating has not been fully stripped
Stains, efflorescence, or contamination remain on the paver surface
Technical Specifications: Alliance Alliance Gator Seal Signature Series Natural Look Water Based Paver Sealer
Product typeWater based acrylic paver sealer
FinishHigh gloss wet look
Compatible surfacesUnsealed concrete pavers, natural stone, masonry, and retaining walls
Can be used as resealerNo. unsealed surfaces only
Coverage per gallonApproximately 175 sq ft (varies by porosity and joint size)
Coverage per 5 gallonApproximately 875 sq ft
Number of coatsOne coat only
Application methodSprayer and water based foam roller (yellow). 2 people recommended.
Section size per application pass60 sq ft sections
Rain safe after application24 hoursutes
Full use after application24 hours
Application temperature32°F to 85°F (16°C to 29°C)
Dry conditions required before applyingMinimum 48 hours
Minimum paver age before sealing60 days after installation
Joint stabilizerYes
Tool cleanupWater and soap
Dilution requiredNo. apply full strength
Minimum storage temperatureAbove 32°F (0°C) at all times
Available sizes1 gallon and 5 gallon
ManufacturerAlliance Designer Products Inc.
All specifications sourced from the official Alliance Gator Technical Data Sheet (TDS). Always verify the latest TDS at AllianceGator.com before applying. Coverage varies based on paver porosity and joint size. Specifications are subject to change by the manufacturer.
Manufacturer Technical Data Sheet: Alliance Gator Seal Signature Series Natural Look
Official document published by Alliance Designer Products Inc. Contains full application instructions, surface preparation requirements, and warranty details.
alliancegator.com. Opens in new tab
How Much Alliance Gator Seal Signature Series Natural Look Do You Need?
Coverage varies by surface porosity and joint width. The 175 sq ft per gallon rate applies to standard concrete paver surfaces. More porous natural stone and masonry surfaces may absorb more sealer and reduce coverage per gallon.
Coverage per gallon — concrete pavers, stone and masonry
1 Gallon
~175 sq ft
5 Gallon
~875 sq ft
8 oz Sample
~21 sq ft
Size
Coverage
Best For
1 Gallon
~175 sq ft
Patios and walkways up to 175 sq ft
5 Gallon
~875 sq ft
Large patios, driveways, and retaining walls
8 oz Sample
~21 sq ft
Test on your specific surface before ordering
Coverage varies by surface porosity and joint width. More porous natural stone and masonry will reduce coverage per gallon. Alliance Gator Seal Signature Series Natural Look carries a 10 year limited warranty when applied correctly to eligible surfaces. Not sure how many gallons you need? Call us at (856) 418-4895.
Why Buy Alliance Gator Seal Signature Series Natural Look from Polymeric Sand Store?
Alliance makes excellent products and we carry them because we believe in them. Here is what you get when you order Alliance Gator Seal Signature Series Natural Look from Polymeric Sand Store.
Same day shipping on every order Order Alliance Gator Seal Signature Series Natural Look before 2 PM Eastern time and your order ships today. We ship to the continental United States every day.
Real expert advice available 24 hours a day, 7 days a week Call or text (856) 418-4895 any time. Not sure if Alliance Gator Seal Signature Series Natural Look is the right finish for your pavers, or whether you need Satin Look, Natural Look, or Resealer? We will help you make the right choice before you order.
Full Alliance product line available We carry the complete Alliance line including all polymeric sands, jointing materials, cleaners, and sealers. Order Alliance Gator Seal Signature Series Natural Look together with Gator Shampoo, Gator Efflorescence Cleaner, and your polymeric sand in one shipment.
Coverage calculation support Alliance Gator Seal Signature Series Natural Look coverage varies by paver porosity and joint width. Call us and we will help you calculate how many gallons you need before you order so you are not short on a job.
30 day satisfaction guarantee If something is wrong with your order, contact us within 30 days and we will make it right. We accept returns on items that are unopened, unused, and in their original packaging. You can return the product for a full refund, or contact us for a pre-paid return label which will be deducted from your refund.
Frequently Asked Questions: Alliance Alliance Gator Seal Signature Series Natural Look Water Based Paver Sealer
All three are acrylic based paver sealers that provide the same protection against oil, dirt, de icing salt, and UV damage. The difference is finish appearance only. Natural Look leaves pavers looking exactly as they do unsealed. no sheen at all. Alliance Gator Seal Signature Series Natural Look delivers a low gloss high gloss wet finish that enhances color slightly. Wet Look provides a high gloss finish that makes pavers look wet and dramatically deepens the color. Most homeowners choose Wet Look as the balanced option. Call us at (856) 418-4895 and we can help you choose.
No. Alliance Gator Seal Signature Series Natural Look is specifically formulated for unsealed surfaces only and cannot be used as a resealer over an existing sealer coating. If your pavers are already sealed, you need Gator Seal Resealer, which is designed to penetrate and reactivate an existing sealer. Applying Alliance Gator Seal Signature Series Natural Look over an existing sealer will result in poor adhesion and sealer failure.
Wait at least 60 days after new paver installation before applying Alliance Gator Seal Signature Series Natural Look. New concrete pavers need time to fully cure and off-gas before sealing. Sealing too early can trap moisture inside the paver, cause discoloration, or prevent the sealer from properly bonding to the surface. Always consult the paver manufacturer for their specific recommendation on when to seal.
The application process requires spraying the sealer onto the surface in 60 sq ft sections and then immediately back rolling with a water based foam roller (yellow) to remove excess sealer. This must happen quickly before the sealer begins to cure. With one person, it is very difficult to spray and back roll fast enough to avoid uneven application or pooling. With two people. one spraying and one rolling. the process moves efficiently and the finish comes out consistent and even.
Coverage is approximately 200 sq ft per gallon as a stand alone sealer, though this varies based on paver porosity and joint width. More porous pavers and wider joints absorb more sealer and reduce coverage. For a 500 sq ft patio, plan for approximately 3 gallons. For a 900 sq ft driveway, the 5 gallon size will typically cover the full area. Call us at (856) 418-4895 and we will help you calculate the right amount before you order.
Orders placed before 2 PM Eastern time ship the same day. We keep Alliance Gator Seal Signature Series Natural Look in both the 1 gallon and 5 gallon sizes in stock and ship to homeowners and contractors across the continental United States. For questions about your order, call or text us at (856) 418-4895.
Questions About Alliance Alliance Gator Seal Signature Series Natural Look Water Based Paver Sealer?
Call or text us 24/7 at (856) 418-4895. Not sure which sealer finish is right for your pavers? We will help you choose between Wet Look, Wet Look, Natural Look, and Resealer before you order. Orders placed before 2 PM Eastern time ship the same day.
Talk to an Expert
Shop All Sealers
Alliance Designer Products · Sold by Polymeric Sand Store
Gator Seal Signature Series Natural Look Water Based Sealer
High gloss water based sealer for concrete pavers. No color enhancement. Can be applied on damp surfaces. Water based fluorochemical sealer for concrete pavers, natural stone, masonry, and retaining walls. Zero gloss natural look finish. Works down to 32°F. Can be applied on damp surfaces. 10 year limited warranty. Rain safe in 24 hours.
Zero Gloss. Natural Look Finish.Works Down to 32°FConcrete Pavers, Stone and Masonry
200 ft²/galCoverage per gallon
24 hoursRain safe after
1 gal / 5 galAvailable sizes
What Is Alliance Alliance Gator Seal Signature Series Natural Look Water Based Paver Sealer?
Important: Alliance Gator Seal Signature Series Natural Look is for unsealed concrete paver surfaces only. It cannot be used as a resealer over an existing sealer coating. Pavers must be clean and largely dry, though Alliance Gator Seal Signature Series Natural Look can be applied on slightly damp surfaces unlike solvent based sealers and free of all stains and efflorescence before application. Wait at least 60 days after new paver installation before sealing. Temperature must be between 60°F and 85°F at time of application.
Alliance Gator Seal Signature Series Natural Look is a water based fluorochemical sealer that penetrates deep into concrete paver surfaces to protect them from the inside out. It delivers a high gloss wet look finish that enhances the natural color of your pavers with a subtle sheen. The result is a natural look appearance with zero gloss that makes pavers look their best while adding a durable protective layer underneath.
Alliance Gator Seal Signature Series Natural Look protects concrete pavers against oil and dirt penetration, de icing salt corrosion, and UV ray damage that fades paver color over time. It also acts as a joint stabilizer, helping to firm up polymeric sand joints and reduce joint erosion between sealing cycles. One coat is all that is needed. When used as a joint sand stabilizer with ASTM C144 sand rather than polymeric sand, coverage is approximately 100 sq ft per gallon. Alliance Gator Seal Signature Series Natural Look is rain safe just 24 hoursutes after application and the sealed surface can be used after 24 hours.
Available in 1 gallon and 5 gallon sizes. Coverage is approximately 200 sq ft per gallon as a stand alone sealer, meaning the 5 gallon size covers approximately 1,000 sq ft as a stand alone sealer. suitable for most residential driveways and large patio areas. Two people are recommended for application. Apply with a sprayer in 60 sq ft sections and back roll with a water based foam roller (yellow) to remove excess sealer from the surface.
Not sure which sealer is right for your pavers? We sell an 8 oz sample bottle of this sealer so you can test the finish and appearance on your specific pavers before committing to a full 1 gallon or 5 gallon order. Order a sample here.
Not sure whether Alliance Gator Seal Signature Series Natural Look is the right finish for your pavers, or whether you need Satin Look, Natural Look, or Resealer instead? Call or text us 24/7 at (856) 418-4895 and we will help you choose the right sealer before you order.
1 Gallon
Covers approx. 175 sq ft
5 Gallon
Covers approx. 875 sq ft
Is Alliance Gator Seal Signature Series Natural Look the Right Sealer for Your Pavers?
Unsealed surfaces only. Not a resealer. Alliance Gator Seal Signature Series Natural Look is formulated for first time sealing of bare unsealed concrete pavers. If your pavers are already sealed, you need Gator Seal Resealer instead. Not sure if your pavers are sealed or unsealed? Call us at (856) 418-4895.
Homeowners who want a clean finished look without heavy gloss Alliance Gator Seal Signature Series Natural Look delivers a high gloss wet look finish that enhances paver color and gives the surface a well-maintained polished appearance without the mirror-like shine of a wet look sealer. It is the finish of choice for homeowners who want the maximum visual impact and the most vibrant, color-enhanced appearance from their paver surface.
Concrete paver driveways, patios, walkways, and pool surrounds Alliance Gator Seal Signature Series Natural Look is suitable for all standard concrete paver applications including driveways, patios, walkways, steps, and pool surrounds. The sealer protects against the specific challenges each surface faces: oil from vehicles on driveways, de icing salt in colder climates, and UV fading on sun-exposed surfaces.
Paver surfaces with polymeric sand joints that need stabilizing Alliance Gator Seal Signature Series Natural Look acts as a joint stabilizer in addition to sealing the paver surface. This dual function makes it particularly valuable on paver surfaces where the polymeric sand joints are beginning to show wear or where extra joint stability is wanted between re-sanding cycles.
Cold climate applications where de icing salts are used Alliance Gator Seal Signature Series Natural Look creates a protective barrier inside the paver that resists corrosion from de icing salts. This makes it particularly well suited for driveways and walkways in northern climates where salt and calcium chloride are applied in winter.
Not for already sealed pavers or natural stone Alliance Gator Seal Signature Series Natural Look is formulated for bare unsealed concrete pavers, natural stone, masonry, and retaining walls. It cannot be used over an existing sealer coating. use Gator Seal Resealer for that application. It is not recommended for natural stone surfaces.
Comparing sealer finishes? Wet Look sits between Natural Look (no sheen) and Wet Look (high gloss). If you want the pavers to look exactly as they do naturally, choose Natural Look. If you want a bold wet appearance, choose Wet Look. Satin is the balanced option most homeowners prefer. Still unsure? Call or text us at (856) 418-4895.
What Does Alliance Alliance Gator Seal Signature Series Natural Look Water Based Paver Sealer Do?
High gloss wet look finish with enhanced color Alliance Gator Seal Signature Series Natural Look delivers a refined high gloss finish that enhances the natural color of concrete pavers with a subtle high gloss wet finish. The finish makes pavers look cleaner and more vibrant without the heavy reflective gloss of a wet look sealer.
Deep penetrating acrylic formula Alliance Gator Seal Signature Series Natural Look penetrates deep into the concrete paver structure rather than forming a thick film on the surface. This deep penetration ensures the protective properties work from within the paver, creating a more durable and longer lasting seal compared to surface-only coatings.
Protects against oil, dirt, de icing salt, and UV damage Alliance Gator Seal Signature Series Natural Look creates a barrier inside the paver that resists oil and dirt penetration, de icing salt corrosion, and UV ray damage that causes paver fading and color degradation over time. Sealed pavers are significantly easier to clean and maintain.
Acts as a joint stabilizer In addition to sealing the paver surface, Alliance Gator Seal Signature Series Natural Look penetrates into the polymeric sand joints and helps stabilize them, reducing joint erosion and extending the life of the jointing material between re-sanding cycles.
Rain safe in 24 hoursutes Alliance Gator Seal Signature Series Natural Look is water repellent and rain safe just 24 hoursutes after application. Once rain safe, light rain will not damage the applied sealer. The sealed surface is ready for foot traffic and normal use after 24 hours.
One coat application Alliance Gator Seal Signature Series Natural Look requires only one coat. Applying a second coat is not recommended and will not improve results. The spray and back roll application method ensures even coverage and removes excess sealer that could cause uneven appearance or pooling on the surface.
How to Apply Alliance Alliance Gator Seal Signature Series Natural Look Water Based Paver Sealer
Always refer to the latest Alliance Gator Seal Signature Series Natural Look Technical Data Sheet (TDS) before applying. Two people are recommended for application. Watch the Alliance online application video before starting.
Critical pre-application requirements: Pavers must be at least 60 days old. Surface must be 100 percent dry. pavers and jointing sand both. Temperature must be between 32°F and 85°F. Paver surface must be cool to the touch. No rain expected within 24 hours of application. Allow 48 hours after polymeric sand installation before sealing. All stains, efflorescence, and existing sealer must be fully removed before Alliance Gator Seal Signature Series Natural Look is applied. Test on a hidden 4 sq ft area first.
1
Remove all stains and strip any existing sealer
Remove all oil, grease, and rust stains using the appropriate Gator Clean products. If any unknown coating exists on the paver surface, remove it completely using Gator Sealer Stripper before applying Alliance Gator Seal Signature Series Natural Look. Applying over a contaminated or previously sealed surface will result in poor adhesion and sealer failure.
2
Replace contaminated jointing sand
Remove all contaminated jointing material and replace with fresh Gator Polymeric Sand following the standard installation instructions. Allow the new polymeric sand to harden for a minimum of 48 hours at above 60°F with no rain before proceeding to the next step.
3
Clean the entire surface with Gator Efflorescence Cleaner
Clean the entire paver surface with Gator Efflorescence Cleaner. This removes any efflorescence trapped in the paver pores and thoroughly cleans the surface to ensure proper sealer adhesion. Wait at least 48 hours at above 60°F with no rain after cleaning so the surface and polymeric sand are completely dry before applying Alliance Gator Seal Signature Series Natural Look.
4
Apply Alliance Gator Seal Signature Series Natural Look in 60 sq ft sections
Using a sprayer, apply one coat of Alliance Gator Seal Signature Series Natural Look in sections of approximately 60 sq ft at a time. Do not thin or dilute the product. Apply evenly across each section before moving to the back rolling step. Work in sections to ensure the sealer does not begin to cure before the roller step is completed.
5
Back roll immediately with a water based foam roller (yellow)
Immediately after spraying each 60 sq ft section, use a water based foam roller (yellow) to back roll the Alliance Gator Seal Signature Series Natural Look, removing excess sealer left on the surface. This step is critical to achieving an even, consistent finish. This is why two people are recommended. one sprays while the other back rolls. Apply one coat only.
6
Allow 24 hoursutes to rain safe, 24 hours to full use
Alliance Gator Seal Signature Series Natural Look is rain safe 24 hoursutes after application. Keep foot traffic and vehicles off the sealed surface for 24 hours after application to allow the sealer to fully cure. Clean all application equipment with water and soap immediately after use.
Do not apply Alliance Gator Seal Signature Series Natural Look if any of these conditions exist
Pavers are less than 60 days old
Surface is damp or wet. pavers and sand must be 100 percent dry
Temperature is below 60°F or above 85°F
Rain is forecast within 24 hoursutes of application
48 hours of dry conditions before application have not been confirmed
Existing sealer coating has not been fully stripped
Stains, efflorescence, or contamination remain on the paver surface
Technical Specifications: Alliance Alliance Gator Seal Signature Series Natural Look Water Based Paver Sealer
Product typeWater based acrylic paver sealer
FinishHigh gloss wet look
Compatible surfacesUnsealed concrete pavers, natural stone, masonry, and retaining walls
Can be used as resealerNo. unsealed surfaces only
Coverage per gallonApproximately 175 sq ft (varies by porosity and joint size)
Coverage per 5 gallonApproximately 875 sq ft
Number of coatsOne coat only
Application methodSprayer and water based foam roller (yellow). 2 people recommended.
Section size per application pass60 sq ft sections
Rain safe after application24 hoursutes
Full use after application24 hours
Application temperature32°F to 85°F (16°C to 29°C)
Dry conditions required before applyingMinimum 48 hours
Minimum paver age before sealing60 days after installation
Joint stabilizerYes
Tool cleanupWater and soap
Dilution requiredNo. apply full strength
Minimum storage temperatureAbove 32°F (0°C) at all times
Available sizes1 gallon and 5 gallon
ManufacturerAlliance Designer Products Inc.
All specifications sourced from the official Alliance Gator Technical Data Sheet (TDS). Always verify the latest TDS at AllianceGator.com before applying. Coverage varies based on paver porosity and joint size. Specifications are subject to change by the manufacturer.
Manufacturer Technical Data Sheet: Alliance Gator Seal Signature Series Natural Look
Official document published by Alliance Designer Products Inc. Contains full application instructions, surface preparation requirements, and warranty details.
alliancegator.com. Opens in new tab
How Much Alliance Gator Seal Signature Series Natural Look Do You Need?
Coverage varies by surface porosity and joint width. The 175 sq ft per gallon rate applies to standard concrete paver surfaces. More porous natural stone and masonry surfaces may absorb more sealer and reduce coverage per gallon.
Coverage per gallon — concrete pavers, stone and masonry
1 Gallon
~175 sq ft
5 Gallon
~875 sq ft
8 oz Sample
~21 sq ft
Size
Coverage
Best For
1 Gallon
~175 sq ft
Patios and walkways up to 175 sq ft
5 Gallon
~875 sq ft
Large patios, driveways, and retaining walls
8 oz Sample
~21 sq ft
Test on your specific surface before ordering
Coverage varies by surface porosity and joint width. More porous natural stone and masonry will reduce coverage per gallon. Alliance Gator Seal Signature Series Natural Look carries a 10 year limited warranty when applied correctly to eligible surfaces. Not sure how many gallons you need? Call us at (856) 418-4895.
Why Buy Alliance Gator Seal Signature Series Natural Look from Polymeric Sand Store?
Alliance makes excellent products and we carry them because we believe in them. Here is what you get when you order Alliance Gator Seal Signature Series Natural Look from Polymeric Sand Store.
Same day shipping on every order Order Alliance Gator Seal Signature Series Natural Look before 2 PM Eastern time and your order ships today. We ship to the continental United States every day.
Real expert advice available 24 hours a day, 7 days a week Call or text (856) 418-4895 any time. Not sure if Alliance Gator Seal Signature Series Natural Look is the right finish for your pavers, or whether you need Satin Look, Natural Look, or Resealer? We will help you make the right choice before you order.
Full Alliance product line available We carry the complete Alliance line including all polymeric sands, jointing materials, cleaners, and sealers. Order Alliance Gator Seal Signature Series Natural Look together with Gator Shampoo, Gator Efflorescence Cleaner, and your polymeric sand in one shipment.
Coverage calculation support Alliance Gator Seal Signature Series Natural Look coverage varies by paver porosity and joint width. Call us and we will help you calculate how many gallons you need before you order so you are not short on a job.
30 day satisfaction guarantee If something is wrong with your order, contact us within 30 days and we will make it right. We accept returns on items that are unopened, unused, and in their original packaging. You can return the product for a full refund, or contact us for a pre-paid return label which will be deducted from your refund.
Frequently Asked Questions: Alliance Alliance Gator Seal Signature Series Natural Look Water Based Paver Sealer
All three are acrylic based paver sealers that provide the same protection against oil, dirt, de icing salt, and UV damage. The difference is finish appearance only. Natural Look leaves pavers looking exactly as they do unsealed. no sheen at all. Alliance Gator Seal Signature Series Natural Look delivers a low gloss high gloss wet finish that enhances color slightly. Wet Look provides a high gloss finish that makes pavers look wet and dramatically deepens the color. Most homeowners choose Wet Look as the balanced option. Call us at (856) 418-4895 and we can help you choose.
No. Alliance Gator Seal Signature Series Natural Look is specifically formulated for unsealed surfaces only and cannot be used as a resealer over an existing sealer coating. If your pavers are already sealed, you need Gator Seal Resealer, which is designed to penetrate and reactivate an existing sealer. Applying Alliance Gator Seal Signature Series Natural Look over an existing sealer will result in poor adhesion and sealer failure.
Wait at least 60 days after new paver installation before applying Alliance Gator Seal Signature Series Natural Look. New concrete pavers need time to fully cure and off-gas before sealing. Sealing too early can trap moisture inside the paver, cause discoloration, or prevent the sealer from properly bonding to the surface. Always consult the paver manufacturer for their specific recommendation on when to seal.
The application process requires spraying the sealer onto the surface in 60 sq ft sections and then immediately back rolling with a water based foam roller (yellow) to remove excess sealer. This must happen quickly before the sealer begins to cure. With one person, it is very difficult to spray and back roll fast enough to avoid uneven application or pooling. With two people. one spraying and one rolling. the process moves efficiently and the finish comes out consistent and even.
Coverage is approximately 200 sq ft per gallon as a stand alone sealer, though this varies based on paver porosity and joint width. More porous pavers and wider joints absorb more sealer and reduce coverage. For a 500 sq ft patio, plan for approximately 3 gallons. For a 900 sq ft driveway, the 5 gallon size will typically cover the full area. Call us at (856) 418-4895 and we will help you calculate the right amount before you order.
Orders placed before 2 PM Eastern time ship the same day. We keep Alliance Gator Seal Signature Series Natural Look in both the 1 gallon and 5 gallon sizes in stock and ship to homeowners and contractors across the continental United States. For questions about your order, call or text us at (856) 418-4895.
Questions About Alliance Alliance Gator Seal Signature Series Natural Look Water Based Paver Sealer?
Call or text us 24/7 at (856) 418-4895. Not sure which sealer finish is right for your pavers? We will help you choose between Wet Look, Wet Look, Natural Look, and Resealer before you order. Orders placed before 2 PM Eastern time ship the same day.
Talk to an Expert
Shop All Sealers
Select Size
From $38.85
Original: $110.99
-65%
Alliance Gator Seal Signature Series Natural Look Water Based Sealer—
$110.99
$38.85
Description
Alliance Designer Products · Sold by Polymeric Sand Store
Gator Seal Signature Series Natural Look Water Based Sealer
High gloss water based sealer for concrete pavers. No color enhancement. Can be applied on damp surfaces. Water based fluorochemical sealer for concrete pavers, natural stone, masonry, and retaining walls. Zero gloss natural look finish. Works down to 32°F. Can be applied on damp surfaces. 10 year limited warranty. Rain safe in 24 hours.
Zero Gloss. Natural Look Finish.Works Down to 32°FConcrete Pavers, Stone and Masonry
200 ft²/galCoverage per gallon
24 hoursRain safe after
1 gal / 5 galAvailable sizes
What Is Alliance Alliance Gator Seal Signature Series Natural Look Water Based Paver Sealer?
Important: Alliance Gator Seal Signature Series Natural Look is for unsealed concrete paver surfaces only. It cannot be used as a resealer over an existing sealer coating. Pavers must be clean and largely dry, though Alliance Gator Seal Signature Series Natural Look can be applied on slightly damp surfaces unlike solvent based sealers and free of all stains and efflorescence before application. Wait at least 60 days after new paver installation before sealing. Temperature must be between 60°F and 85°F at time of application.
Alliance Gator Seal Signature Series Natural Look is a water based fluorochemical sealer that penetrates deep into concrete paver surfaces to protect them from the inside out. It delivers a high gloss wet look finish that enhances the natural color of your pavers with a subtle sheen. The result is a natural look appearance with zero gloss that makes pavers look their best while adding a durable protective layer underneath.
Alliance Gator Seal Signature Series Natural Look protects concrete pavers against oil and dirt penetration, de icing salt corrosion, and UV ray damage that fades paver color over time. It also acts as a joint stabilizer, helping to firm up polymeric sand joints and reduce joint erosion between sealing cycles. One coat is all that is needed. When used as a joint sand stabilizer with ASTM C144 sand rather than polymeric sand, coverage is approximately 100 sq ft per gallon. Alliance Gator Seal Signature Series Natural Look is rain safe just 24 hoursutes after application and the sealed surface can be used after 24 hours.
Available in 1 gallon and 5 gallon sizes. Coverage is approximately 200 sq ft per gallon as a stand alone sealer, meaning the 5 gallon size covers approximately 1,000 sq ft as a stand alone sealer. suitable for most residential driveways and large patio areas. Two people are recommended for application. Apply with a sprayer in 60 sq ft sections and back roll with a water based foam roller (yellow) to remove excess sealer from the surface.
Not sure which sealer is right for your pavers? We sell an 8 oz sample bottle of this sealer so you can test the finish and appearance on your specific pavers before committing to a full 1 gallon or 5 gallon order. Order a sample here.
Not sure whether Alliance Gator Seal Signature Series Natural Look is the right finish for your pavers, or whether you need Satin Look, Natural Look, or Resealer instead? Call or text us 24/7 at (856) 418-4895 and we will help you choose the right sealer before you order.
1 Gallon
Covers approx. 175 sq ft
5 Gallon
Covers approx. 875 sq ft
Is Alliance Gator Seal Signature Series Natural Look the Right Sealer for Your Pavers?
Unsealed surfaces only. Not a resealer. Alliance Gator Seal Signature Series Natural Look is formulated for first time sealing of bare unsealed concrete pavers. If your pavers are already sealed, you need Gator Seal Resealer instead. Not sure if your pavers are sealed or unsealed? Call us at (856) 418-4895.
Homeowners who want a clean finished look without heavy gloss Alliance Gator Seal Signature Series Natural Look delivers a high gloss wet look finish that enhances paver color and gives the surface a well-maintained polished appearance without the mirror-like shine of a wet look sealer. It is the finish of choice for homeowners who want the maximum visual impact and the most vibrant, color-enhanced appearance from their paver surface.
Concrete paver driveways, patios, walkways, and pool surrounds Alliance Gator Seal Signature Series Natural Look is suitable for all standard concrete paver applications including driveways, patios, walkways, steps, and pool surrounds. The sealer protects against the specific challenges each surface faces: oil from vehicles on driveways, de icing salt in colder climates, and UV fading on sun-exposed surfaces.
Paver surfaces with polymeric sand joints that need stabilizing Alliance Gator Seal Signature Series Natural Look acts as a joint stabilizer in addition to sealing the paver surface. This dual function makes it particularly valuable on paver surfaces where the polymeric sand joints are beginning to show wear or where extra joint stability is wanted between re-sanding cycles.
Cold climate applications where de icing salts are used Alliance Gator Seal Signature Series Natural Look creates a protective barrier inside the paver that resists corrosion from de icing salts. This makes it particularly well suited for driveways and walkways in northern climates where salt and calcium chloride are applied in winter.
Not for already sealed pavers or natural stone Alliance Gator Seal Signature Series Natural Look is formulated for bare unsealed concrete pavers, natural stone, masonry, and retaining walls. It cannot be used over an existing sealer coating. use Gator Seal Resealer for that application. It is not recommended for natural stone surfaces.
Comparing sealer finishes? Wet Look sits between Natural Look (no sheen) and Wet Look (high gloss). If you want the pavers to look exactly as they do naturally, choose Natural Look. If you want a bold wet appearance, choose Wet Look. Satin is the balanced option most homeowners prefer. Still unsure? Call or text us at (856) 418-4895.
What Does Alliance Alliance Gator Seal Signature Series Natural Look Water Based Paver Sealer Do?
High gloss wet look finish with enhanced color Alliance Gator Seal Signature Series Natural Look delivers a refined high gloss finish that enhances the natural color of concrete pavers with a subtle high gloss wet finish. The finish makes pavers look cleaner and more vibrant without the heavy reflective gloss of a wet look sealer.
Deep penetrating acrylic formula Alliance Gator Seal Signature Series Natural Look penetrates deep into the concrete paver structure rather than forming a thick film on the surface. This deep penetration ensures the protective properties work from within the paver, creating a more durable and longer lasting seal compared to surface-only coatings.
Protects against oil, dirt, de icing salt, and UV damage Alliance Gator Seal Signature Series Natural Look creates a barrier inside the paver that resists oil and dirt penetration, de icing salt corrosion, and UV ray damage that causes paver fading and color degradation over time. Sealed pavers are significantly easier to clean and maintain.
Acts as a joint stabilizer In addition to sealing the paver surface, Alliance Gator Seal Signature Series Natural Look penetrates into the polymeric sand joints and helps stabilize them, reducing joint erosion and extending the life of the jointing material between re-sanding cycles.
Rain safe in 24 hoursutes Alliance Gator Seal Signature Series Natural Look is water repellent and rain safe just 24 hoursutes after application. Once rain safe, light rain will not damage the applied sealer. The sealed surface is ready for foot traffic and normal use after 24 hours.
One coat application Alliance Gator Seal Signature Series Natural Look requires only one coat. Applying a second coat is not recommended and will not improve results. The spray and back roll application method ensures even coverage and removes excess sealer that could cause uneven appearance or pooling on the surface.
How to Apply Alliance Alliance Gator Seal Signature Series Natural Look Water Based Paver Sealer
Always refer to the latest Alliance Gator Seal Signature Series Natural Look Technical Data Sheet (TDS) before applying. Two people are recommended for application. Watch the Alliance online application video before starting.
Critical pre-application requirements: Pavers must be at least 60 days old. Surface must be 100 percent dry. pavers and jointing sand both. Temperature must be between 32°F and 85°F. Paver surface must be cool to the touch. No rain expected within 24 hours of application. Allow 48 hours after polymeric sand installation before sealing. All stains, efflorescence, and existing sealer must be fully removed before Alliance Gator Seal Signature Series Natural Look is applied. Test on a hidden 4 sq ft area first.
1
Remove all stains and strip any existing sealer
Remove all oil, grease, and rust stains using the appropriate Gator Clean products. If any unknown coating exists on the paver surface, remove it completely using Gator Sealer Stripper before applying Alliance Gator Seal Signature Series Natural Look. Applying over a contaminated or previously sealed surface will result in poor adhesion and sealer failure.
2
Replace contaminated jointing sand
Remove all contaminated jointing material and replace with fresh Gator Polymeric Sand following the standard installation instructions. Allow the new polymeric sand to harden for a minimum of 48 hours at above 60°F with no rain before proceeding to the next step.
3
Clean the entire surface with Gator Efflorescence Cleaner
Clean the entire paver surface with Gator Efflorescence Cleaner. This removes any efflorescence trapped in the paver pores and thoroughly cleans the surface to ensure proper sealer adhesion. Wait at least 48 hours at above 60°F with no rain after cleaning so the surface and polymeric sand are completely dry before applying Alliance Gator Seal Signature Series Natural Look.
4
Apply Alliance Gator Seal Signature Series Natural Look in 60 sq ft sections
Using a sprayer, apply one coat of Alliance Gator Seal Signature Series Natural Look in sections of approximately 60 sq ft at a time. Do not thin or dilute the product. Apply evenly across each section before moving to the back rolling step. Work in sections to ensure the sealer does not begin to cure before the roller step is completed.
5
Back roll immediately with a water based foam roller (yellow)
Immediately after spraying each 60 sq ft section, use a water based foam roller (yellow) to back roll the Alliance Gator Seal Signature Series Natural Look, removing excess sealer left on the surface. This step is critical to achieving an even, consistent finish. This is why two people are recommended. one sprays while the other back rolls. Apply one coat only.
6
Allow 24 hoursutes to rain safe, 24 hours to full use
Alliance Gator Seal Signature Series Natural Look is rain safe 24 hoursutes after application. Keep foot traffic and vehicles off the sealed surface for 24 hours after application to allow the sealer to fully cure. Clean all application equipment with water and soap immediately after use.
Do not apply Alliance Gator Seal Signature Series Natural Look if any of these conditions exist
Pavers are less than 60 days old
Surface is damp or wet. pavers and sand must be 100 percent dry
Temperature is below 60°F or above 85°F
Rain is forecast within 24 hoursutes of application
48 hours of dry conditions before application have not been confirmed
Existing sealer coating has not been fully stripped
Stains, efflorescence, or contamination remain on the paver surface
Technical Specifications: Alliance Alliance Gator Seal Signature Series Natural Look Water Based Paver Sealer
Product typeWater based acrylic paver sealer
FinishHigh gloss wet look
Compatible surfacesUnsealed concrete pavers, natural stone, masonry, and retaining walls
Can be used as resealerNo. unsealed surfaces only
Coverage per gallonApproximately 175 sq ft (varies by porosity and joint size)
Coverage per 5 gallonApproximately 875 sq ft
Number of coatsOne coat only
Application methodSprayer and water based foam roller (yellow). 2 people recommended.
Section size per application pass60 sq ft sections
Rain safe after application24 hoursutes
Full use after application24 hours
Application temperature32°F to 85°F (16°C to 29°C)
Dry conditions required before applyingMinimum 48 hours
Minimum paver age before sealing60 days after installation
Joint stabilizerYes
Tool cleanupWater and soap
Dilution requiredNo. apply full strength
Minimum storage temperatureAbove 32°F (0°C) at all times
Available sizes1 gallon and 5 gallon
ManufacturerAlliance Designer Products Inc.
All specifications sourced from the official Alliance Gator Technical Data Sheet (TDS). Always verify the latest TDS at AllianceGator.com before applying. Coverage varies based on paver porosity and joint size. Specifications are subject to change by the manufacturer.
Manufacturer Technical Data Sheet: Alliance Gator Seal Signature Series Natural Look
Official document published by Alliance Designer Products Inc. Contains full application instructions, surface preparation requirements, and warranty details.
alliancegator.com. Opens in new tab
How Much Alliance Gator Seal Signature Series Natural Look Do You Need?
Coverage varies by surface porosity and joint width. The 175 sq ft per gallon rate applies to standard concrete paver surfaces. More porous natural stone and masonry surfaces may absorb more sealer and reduce coverage per gallon.
Coverage per gallon — concrete pavers, stone and masonry
1 Gallon
~175 sq ft
5 Gallon
~875 sq ft
8 oz Sample
~21 sq ft
Size
Coverage
Best For
1 Gallon
~175 sq ft
Patios and walkways up to 175 sq ft
5 Gallon
~875 sq ft
Large patios, driveways, and retaining walls
8 oz Sample
~21 sq ft
Test on your specific surface before ordering
Coverage varies by surface porosity and joint width. More porous natural stone and masonry will reduce coverage per gallon. Alliance Gator Seal Signature Series Natural Look carries a 10 year limited warranty when applied correctly to eligible surfaces. Not sure how many gallons you need? Call us at (856) 418-4895.
Why Buy Alliance Gator Seal Signature Series Natural Look from Polymeric Sand Store?
Alliance makes excellent products and we carry them because we believe in them. Here is what you get when you order Alliance Gator Seal Signature Series Natural Look from Polymeric Sand Store.
Same day shipping on every order Order Alliance Gator Seal Signature Series Natural Look before 2 PM Eastern time and your order ships today. We ship to the continental United States every day.
Real expert advice available 24 hours a day, 7 days a week Call or text (856) 418-4895 any time. Not sure if Alliance Gator Seal Signature Series Natural Look is the right finish for your pavers, or whether you need Satin Look, Natural Look, or Resealer? We will help you make the right choice before you order.
Full Alliance product line available We carry the complete Alliance line including all polymeric sands, jointing materials, cleaners, and sealers. Order Alliance Gator Seal Signature Series Natural Look together with Gator Shampoo, Gator Efflorescence Cleaner, and your polymeric sand in one shipment.
Coverage calculation support Alliance Gator Seal Signature Series Natural Look coverage varies by paver porosity and joint width. Call us and we will help you calculate how many gallons you need before you order so you are not short on a job.
30 day satisfaction guarantee If something is wrong with your order, contact us within 30 days and we will make it right. We accept returns on items that are unopened, unused, and in their original packaging. You can return the product for a full refund, or contact us for a pre-paid return label which will be deducted from your refund.
Frequently Asked Questions: Alliance Alliance Gator Seal Signature Series Natural Look Water Based Paver Sealer
All three are acrylic based paver sealers that provide the same protection against oil, dirt, de icing salt, and UV damage. The difference is finish appearance only. Natural Look leaves pavers looking exactly as they do unsealed. no sheen at all. Alliance Gator Seal Signature Series Natural Look delivers a low gloss high gloss wet finish that enhances color slightly. Wet Look provides a high gloss finish that makes pavers look wet and dramatically deepens the color. Most homeowners choose Wet Look as the balanced option. Call us at (856) 418-4895 and we can help you choose.
No. Alliance Gator Seal Signature Series Natural Look is specifically formulated for unsealed surfaces only and cannot be used as a resealer over an existing sealer coating. If your pavers are already sealed, you need Gator Seal Resealer, which is designed to penetrate and reactivate an existing sealer. Applying Alliance Gator Seal Signature Series Natural Look over an existing sealer will result in poor adhesion and sealer failure.
Wait at least 60 days after new paver installation before applying Alliance Gator Seal Signature Series Natural Look. New concrete pavers need time to fully cure and off-gas before sealing. Sealing too early can trap moisture inside the paver, cause discoloration, or prevent the sealer from properly bonding to the surface. Always consult the paver manufacturer for their specific recommendation on when to seal.
The application process requires spraying the sealer onto the surface in 60 sq ft sections and then immediately back rolling with a water based foam roller (yellow) to remove excess sealer. This must happen quickly before the sealer begins to cure. With one person, it is very difficult to spray and back roll fast enough to avoid uneven application or pooling. With two people. one spraying and one rolling. the process moves efficiently and the finish comes out consistent and even.
Coverage is approximately 200 sq ft per gallon as a stand alone sealer, though this varies based on paver porosity and joint width. More porous pavers and wider joints absorb more sealer and reduce coverage. For a 500 sq ft patio, plan for approximately 3 gallons. For a 900 sq ft driveway, the 5 gallon size will typically cover the full area. Call us at (856) 418-4895 and we will help you calculate the right amount before you order.
Orders placed before 2 PM Eastern time ship the same day. We keep Alliance Gator Seal Signature Series Natural Look in both the 1 gallon and 5 gallon sizes in stock and ship to homeowners and contractors across the continental United States. For questions about your order, call or text us at (856) 418-4895.
Questions About Alliance Alliance Gator Seal Signature Series Natural Look Water Based Paver Sealer?
Call or text us 24/7 at (856) 418-4895. Not sure which sealer finish is right for your pavers? We will help you choose between Wet Look, Wet Look, Natural Look, and Resealer before you order. Orders placed before 2 PM Eastern time ship the same day.
Talk to an Expert
Shop All Sealers
You may also like
-65%NEW
Alliance Gator Seal Wet Look Solvent Based Acrylic Paver Sealer
$96.99
$33.95
-65%NEW
Alliance Gator Seal Satin Look Solvent Based Acrylic Paver Sealer
$86.99
$30.45
-65%NEW
Alliance Gator Seal Resealer Solvent Based Acrylic Paver Resealer
$90.99
$31.85
NEW
Alliance Gator Seal Signature Series Natural Stone Color Enhancer
$79.99
-65%NEW
Alliance Gator Seal Signature Series Wet Cast Water Based Sealer
$89.99
$31.50
NEW
Alliance Gator Hybrid Seal Low Gloss Plus Color Enhancer Water Based Paver Sealer
$89.99
NEW
Alliance Gator Hybrid Seal Low Gloss Water Based Paver Sealer
$82.99
NEW
Alliance Gator Hybrid Seal High Gloss Water Based Paver Sealer
$87.99
-65%NEW
Techniseal SureFoot – Anti-Slip Grit
$29.99
$10.50
-65%NEW
Rhino Stabilizing Mulch & Stone Glue for Landscaping Pea Gravel, Rubber Mulch, and Straw Binder
$15.99
$5.60
-65%NEW
Alliance Gator Hybrid Seal High Gloss Plus Color Enhancer Water Based Paver Sealer
$104.99
$36.75
Select Size
From $38.85
Original: $110.99
-65%
Alliance Gator Seal Signature Series Natural Look Water Based Sealer—
![\"Alliance](\"https://cdn.shopify.com/s/files/1/0868/5161/7060/files/gator-seal-natural-look-paver-stone-sealer-1-gallon.png?v=1777486841\")
\n![\"Alliance](\"https://cdn.shopify.com/s/files/1/0868/5161/7060/files/gator-seal-natural-look-paver-stone-sealer-5-gallon.png?v=1777486750\")
\n
